Gemtek Systems P-780 User Manual page 28

P-780 User's Guide v1.2
DHCP server and DHCP relay is disabled by default.
Figure 21 –DHCP Settings
Edit – edit the wireless basic settings
To change DHCP setting properties click the Edit button, the DHCP server or DHCP relay service
should be configured:
Figure 22 –DHCP Settings
Status – Select status from the drop-down menu.
Disabled – Disable the DHCP server service.
DHCP Server – Enable the DHCP server service.
DHCP Relay – Enable the DHCP Relay service.
Choose DHCP Server to enable DHCP server service. Choose DHCP Relay to enable DHCP relay
service.
DHCP Server
This DHCP server service enables clients on the LAN to request configuration information, such as IP
address, from a server. Settings of the DHCP service can be viewed just like the follow page.
Figure 23 –DHCP server Settings
Gemtek Systems
February 7, 2005
Page 29 of 60