Network; Network | Interface - Gemtek Systems P-780 User Manual

P-780 User's Guide v1.2
Figure 13 – Wireless Status
Radio1 / Radio2 relates with two wireless interfaces
Channel indicates which channel is in use.
Mode AP or Bridge mode is be used for this wireless interface
Band specify which band is in use for wireless interface
Layer2 Isolation specify the status of Layer2 Isolation service on this wireless interface
Total Connected Clients indicates number of the currently connected clients to your P-780
Antenna Gain indicates antenna Gain value. If use A-807, which is approved/attached Antenna of P-
780, Antenna Gain shows 4.5 dBi in 2.4GHz and 7dBi in 5GHz for regulation's limitation. If use other
external antenna, this will shows 8dBi.
Total Output Power (EIRP) indicates EIRP value set to the P-780
MAC ACL indicates the status of MAC ACL feature on P-780

Network

Network | Interface

The interface configured is bridge device therefore only one interface is displayed
here for configuration.
Bridge interface and its settings are listed in the Interface page.
Gemtek Systems
4.5 dBi
16 dBm
12 dBm
February 7, 2005
Page 25 of 60