Gemtek Systems P-780 User Manual page 30

P-780 User's Guide v1.2
Figure 25 – Reboot information
Reboot – Click the button to restart the server and apply the changes.
If there is no other setting needed to be modified, click the Reboot button for
applying all modifications.
And if there are still other setting modifications needed, go ahead to finish all
changes and then click Reboot button to restart and apply all settings together.
When P-780 network Interface uses DHCP to get IP address dynamically, DHCP
server service cannot be enabled.
When P-780 uses DHCP to get IP address, the similar WEB UI will be appears:
Figure 26 – Warning information
Gemtek Systems
February 7, 2005
Page 31 of 60