Wireless | Wep - Gemtek Systems P-780 User Manual

P-780 User's Guide v1.2
Figure 41 – Bridge Link Setting
Remote MAC – Add the remote peer's MAC address you want to configure as a bridge link
Security – Specify WEP or WPA-PSK (TKIP or AES) is used for security policy. WPA-PSK or static
WEP can be used for encrypt each bridge link
Each Bridge link can have its own WEP key/keyIndex for encryption.
Only WEP can be used as security policy for Bridge links now. More enhanced
security policy is in developing.
By default, four WEP keys are all set to "aaaaa". They can be modified in

Wireless | WEP.

Wireless | WEP
Use the Wireless | WEP menu to configure static WEP settings.
This menu only set static WEP key value related with 4 key indexes for each RF
card (wlan1 or wlan2). Enable or Disable static WEP is in the Wireless | Advance
menu.
Figure 42 – WEP Settings
Radio – specify which RF card (wlan1 or wlan2) is needed to be set.
Click Edit to edit the existing wepkey1 to wepkey4.
Gemtek Systems
February 7, 2005
Page 41 of 60