System | Telnet; System | Configuration - Gemtek Systems P-780 User Manual

P-780 User's Guide v1.2

System | Telnet

Use System | Telnet menu to manage the telnet/SSH service of your P-780.
Figure 53 – System Configuration settings
Telnet Service – Enable or disable telnet service of P-780
SSH Service – Enable or disable SSH service of P-780.
The default of these two services are all Enabled. The current IETF SSH (SSHv2) is supported for
security of accessing P-780 via telnet/CLISH.

System | Configuration

Use the System | Configuration menu to configure such system utilities:
Backup – download current working system configuration for backup
Upload/Restore – upload system configuration for restore
Figure 54 – System Configuration settings
You can save your current device configuration file locally using the Backup menu under the System
| Configuration | Backup menu:
Figure 55 – Backup settings
Such device configuration is saved in the specific format file (.cfg).
Description Message shows the current version of firmware.
Click the Preparation button to start saving the configuration file.
Click the Download button to download current working configuration into your local PC.
Gemtek Systems
February 7, 2005
Page 47 of 60