Program Definity - Polycom AVAYA DEFINITY LINKPLUS 1725-361300-001 Interface Manual

Program DEFINITY

Program Handsets
PN: 1725-36130-001_E.doc
is the sequence equivalent to pressing the corresponding softkey on
the desk set.
The handset function menu default settings are shown on each
corresponding button in the above diagram; these may be changed as
described above in Function Menu Programming. Some of these
functions (Mute, Redial, Forward, etc.) are activated by softkeys or
menu options on the SpectraLink 6000 and SpectraLink
FCN
8020/8030 Wireless Telephones.
FCN + 1
MUTE
FCN + 3
CONF
FCN + 5
LND
FCN + 7
VMAIL
FCN + 9
EXIT MENUS
Each handset must be administered on the DEFINITY so the switch
will recognize the handset and allow access to system facilities and
features. The DEFINITY technician or local system programmer
should perform the necessary programming.
Save translations
Before beginning to program the system, the technician may want to
back up the current programming with the save translations
command. This will take time, but will ensure that translations can be
restored if necessary.
Copy settings from a wired set
The easiest way to program the SpectraLink Wireless Telephone on
DEFINITY is to find a wired 8410D station that has settings and
restrictions similar to what is required for the handset, and use the
duplicate station command to copy those settings to a "template"
handset. If there is no 8410D available, find a station that has similar
settings, and use the display or print station command to check the
FCN + 2
XFER
FCN + 4
DROP
FCN + 6
ABDIAL
FCN + 8
CALLBK
Interface Implementation
17