Transferring A Call - Polycom SoundPoint IP 550 User Manual

User Guide SoundPoint IP 550

Transferring a Call

3 - 12
If you have more than one call on hold, press the
b
switch to one of the calls on hold, press the More soft key, and then the
Join soft key.
A conference is created with active call, the call on hold and yourself.
To end a conference call:
Press the EndCall soft key or hang up.
>>
The other parties will continue to be connected.
A call can be transferred in one of three ways:
• Consultative transfer—The party to whom you want to transfer the call
answers their phone before you transfer the call or hang up. You can
consult with them before completing the transfer.
— To transfer a call:
• Blind transfer—The call is automatically transferred after you dial the
number of the party to whom you want to transfer the call.
— To perform a blind transfer:
• Attended transfer—The parties are automatically connected to each other
after you exit the conference.
— Set up a conference call and then end your participation. For more
information, refer to
To transfer a call:
1. During a call, press
The active call is placed on hold.
on page 3-12.
on page 3-13.
Setting Up a Conference
or the Trnsfer soft key.
or to
on page 3-10.