Enabling Do Not Disturb - Polycom SoundPoint IP 550 User Manual

User Guide SoundPoint IP 550

Enabling Do Not Disturb

Note
3 - 16
Dynamic Forwarding
To forward an incoming call to another party:
1. With the phone ringing, press the Forward soft key.
2. Enter a number to forward the incoming call to.
3. Press the Enable soft key.
The incoming call is forwarded to the other party. If call forwarding is
disabled, all future calls will not be forwarded and forwarding will remain
disabled.
Press to prevent the phone from ringing on incoming calls. A
flashing icon and text on the graphic display indicates that Do Not Disturb is
on.
Calls received while Do Not Disturb is enabled are logged in the Missed Calls
list unless configured to be forwarded to another party by your system
administrator.
To disable Do Not Disable, press
This feature is local to the phone, and may be overridden by call server settings.
For more information, contact your system administrator.
Multiple Lines and Do Not Disturb
If multiple lines are configured on your phone, Do Not Disturb can be set on a
line-by-line basis from the list using
contact your system administrator. When Do Not Disturb is enabled for a
particular line, this is indicated by a flashing "X" beside the line indicator on
the display.
again.
and . For more information,