Call Transfer; Conference Calls (Max 3 People); Call Waiting - Polycom 650IP User Manual

5.Call transfer

There are two ways to transfer a call: blind transfer where the number to transfer the call cannot decide
whether or not to accept the call transfer or the hold call transfer, where this option is available.
5.1 Blind transfer
During a conversation press the
will hear a dial tone. Press the Blind Forwarding key and enter the number of the person you want to
transfer the call to. The call will automatically be transferred when the caller answers and you will be
automatically disconnected from the call on hold.
5.2 Transferring with call waiting
During a conversation press the
will hear a dial tone and you can enter the number of the person you want to transfer the call to. As soon as
the dialed number answers, you can decide whether to transfer the call or not.

To transfer the call, simply press the Transfer soft key. The call will then be transferred and you will
disconnected from the previous call on hold

In case the call transfer is rejected, you can resume the call put on hold earlier by pressing the
Cancel soft key.

6.Conference calls (max 3 people)

During a conversation press the Conference soft key to place the incoming call on hold.
At this point you will hear a dial tone and you can enter the number of the person to add to the conference
call. Press the Submit soft key. As soon as the called party answers, you can add it to the conference by
pressing again the Conference soft key. To end the conference call, simply hang up the receiver ending the
call with both parties, which will remain connected between each other.

7.Call waiting

Requirement: Call waiting must be activated as a feature from your telephone service provider. If a call is
received during another call in progress, the display shows the name and number of the caller. At this point
you can decide whether or not to accept the new call while putting the first one on hold.
soft key to place the incoming call on hold. At this point you
soft key to place the incoming call on hold. At this point you
4/7