Advertisement
Shure Publications | User Guides | ANIUSB-Matrix
http://pubs.shure.com/guide/ANIUSB-Matrix/en-US
output levels in the web application to avoid clipping.
Analog Input/Output
LED State
Off
Green
Yellow
Red
Note: The input and output LEDs stay off when metering is set to Post
Fader and the channel is muted in the web application.
USB Audio
LED State
Off
Green
Red (flashing)
Audio Input (Block
Block Pin Assignments:
Connector)
Chassis Ground
Provides an optional connection for microphone shield wire to
Screw
chassis ground.
Audio Output
Balanced audio output connects to an analog device. Set the
(Block Connector)
output level in the web application to match the input sensitivity of
the analog device.Note: See front panel labels for block connector
assignments.
USB Port
Connects to a computer to send and receive any combination of
Audio Signal
Level
less than -60
dBFS
-60 dBFS to
-18 dBFS
-18 dBFS to -6
dBFS
-6 dBFS or
more
Status
No USB device connected
USB device operating
successfully
Problem detected with
connected USB audio device
Audio +
Audio -
Audio
ground
9/12/17, 8)20 AM
Page 7 of 39
Advertisement
Need help?
Do you have a question about the ANIUSB-Matrix and is the answer not in the manual?
Questions and answers