Shure ANIUSB-Matrix User Manual page 32

Shure Publications | User Guides | ANIUSB-Matrix
http://pubs.shure.com/guide/ANIUSB-Matrix/en-US
ANIUSB Response:
< REP xx MATRIX_MXR_GAIN yy zzzz
>
Decrement Matrix Mixer Gain
Command String:
< SET xx MATRIX_MXR_GAIN yy DEC
nn >
ANIUSB Response:
< REP xx MATRIX_MXR_GAIN yy zzzz
>
Troubleshooting
Troubleshooting
Problem
Software lags in Google Chrome browser
Sound quality is muffled
Hardware does not show up in device
discovery
No audio
Where zzzz takes on the ASCII values of
0000 to 1400. zzzz is in steps of one-
tenth of a dB.
Where xx is input channel numbers 00-06.
Where yy is output channel numbers 00 or
07-10. Where nn is in steps of one-tenth of
a dB.
Where zzzz takes on the ASCII values of
0000 to 1400. zzzz is in steps of one-
tenth of a dB.
Solution
Problem is browser-related. Turn off
hardware acceleration option in Chrome.
Use equalizer to adjust frequency response.
See the equalizer applications for the
appropriate use.
Ensure the devices are powered
Ensure PC and equipment are on the
same network and set to the same
subnet
Turn off other network interfaces not
used to connect to the device
(including WiFi)
Check that DHCP server is functioning
(if applicable)
Reset the device
Verify the ANIUSB-MATRIX is selected
as the audio device in the audio
devices or properties panel on the
computer
Audio channels must be routed to an
output through the matrix mixer
Connections between devices must be
established in Dante Controller
software
Check cables
9/12/17, 8)20 AM
™
Page 32 of 39