Sensitivity; Slope - Fluke PM3082 Service Manual

CHARACTERISTICS
CHARACTERISTICS
BANDWIDTH EDGE
TRIGGER DTB
Lower transition point of BW
Trigger coupling:
DC
AC
LF-reject
HF-reject
Upper transition point of BW
Trigger coupling:
DC
AC
LF-reject
HF-reject

Sensitivity

EDGE TRIGGER SENSITIVITY
MTB/DTB (PM3092/94)
d.c. to 100 MHz
d.c. to 200 MHz
d.c. to 300 MHz
EDGE TRIGGER SENSITIVITY
MTB/DTB (PM3082/84)
d.c. to 50 MHz
d.c. to 100 MHz
d.c. to 200 MHz
TV TRIGGER SENSITIVITY
amplitude of sync pulse
Note 1: All figures are valid for an ambient temperature range of 5... 40°C, add 20 % for ambient
0... 5 0 °C.
Note 2: Measured with a 2 div centerscreen signal.
Note 3: In noise trigger multiply stated value by 2.
2.3.6

Slope

Slope selection edge
Note 1: In TV-triggering pos/neg video.
SPECIFICATION
d.c.
10 Hz
30 kHz
d.c.
See sensitivity
See sensitivity
See sensitivity
30 kHz
0.5 div
1.0 div
2.0 div
0.5 div
1.0 div
2.0 div
0.7 div
+ or -
ADDITIONAL INFORMATION
vertical coupling in DC
BW = Bandwidth
See note 1 & 3
See note 2
See note 1 & 3
See note 2
See note 1
MTB and DTB. See notel
2 - 9