Table of Contents
Advertisement
13 In the Fast Configuration Wizard - SIP dialog box, enter the following
information:
Field
SIP Server
SIP Server IP
Address
Transport Type
14 Click the Next button.
15 Enter the required Security information in the dialog box.
Field
Authentication
User Name
Authentication
Password
Description
Select:
•
Specify – to manually configure SIP servers.
•
Off – if SIP servers are not present in the network.
Enter either the IP address of the preferred SIP server
or its host name (if a DNS server is used).
Select the protocol that is used for signaling between
the MCU and the SIP Server or the endpoints
according to the protocol supported by the SIP Server:
UDP – Select this option to use UDP for signaling.
TCP – Select this option to use TCP for signaling.
TLS – The Signaling Host listens on secured port
5061 only and all outgoing connections are
established on secured connections. Calls from SIP
clients or servers to non secured ports are rejected.
The supported security protocols are: TLS 1.0, SSL
2.0 and SSL 3.0.
Description
Enter the conference, Entry Queue or Meeting Room
name as registered with the proxy.
This field can contain up to 20 ASCII characters.
Enter the conference, Entry Queue or Meeting Room
password as defined in the proxy.
This field can contain up to 20 ASCII characters.
9
Advertisement
Table of Contents
