Polycom DOC2562A Installation & Configuration Manual page 15

32 In the Fast Configuration Wizard - System Flags dialog box, enter the
following information
Flag
Conference ID
Length (MCU)
Minimum
Conference ID
Length (User)
Maximum
Conference ID
Length (User)
MCU Display Name
Terminate
Conference when
Chairperson Exits
Auto Extend
Conferences
These flags can be modified later, if required, via the Setup menu's
System Configuration option. For more information, see the
RMX 1500/2000/4000 Administrator's Guide, "System Configuration"
on page 18-5.
:
Value
The number of digits of the Conference ID that will be
assigned by the MCU.
Range: 2-16 (Default: 5)
Note: Selecting 2 digits limits the number of
simultaneous ongoing conferences to 99.
The minimum number of digits that
the user must enter when
manually assigning a numeric ID
to a conference.
Range: 2-16 (Default: 4)
The maximum number of digits
that the user can enter when
manually assigning a Numeric ID
to a conference.
Range: 2-16 (Default: 8)
The MCU name that appears at the endpoints.
Default: Polycom RMX 1500.
Yes/No (Default: Yes)
When Yes is selected (default) allows conferences
running on the RMX to be automatically extended as
long as there are participants connected and there are
available resources.
Selecting 2
digits limits the
number of
simultaneous
ongoing
conferences to
99.
15