Table of Contents
Advertisement
Field
Num Plan
Net Specific
Dial-out Prefix
20 Click Next.
21 In the Span Definition dialog box, define the following parameters:
Field
Framing
Side
12
Description
Select the type of signaling (Number Plan) from the
list according to information given by the service
provider.
Default: ISDN
Note: For E1 spans, this parameter is set by the
system.
Select the appropriate service program if one is used
by your service provider (carrier).
Some service providers may have several service
programs that can be used.
Default: None
Enter the prefix that the PBX requires to dial out.
Leave this field blank if a dial-out prefix is not required.
The field can contain be empty (blank) or a numeric
value between 0 and 9999.
Default: Blank
Description
Select the Framing format used by the carrier for the
network interface from the list.
•
For T1 spans, default is SFSF.
•
For E1 spans, default is FEBE.
Select the RMX side on the network.
Default: User side
Note: If the PBX is configured on the network side,
then the RMX unit must be configured as the user
side, and vice versa, or both must be configured
symmetrically.
Advertisement
Table of Contents
