Installing The Temperature And Humidity Sensor - Fasel Elektronik FCU2000 Series Installation Instructions Manual

Installation
5.6

Installing the temperature and humidity sensor

Dimensions of
temperature
sensor,
humidity sensor
as well as the
combined
temperature
and humidity
sensor
Figure 5: Dimensions of the sensors
18
Note!
An installation of a humidity sensor with humidity control is necessary
only for the bathing option "Sauna with humidity ". If a time controlled
humidity control is provided then a humidity sensor is not necessary.
Note!
The sensor of the thermostat must be installed in such a way that it is
not affected by the cool incoming air.
Note!
The temperature and humidity values displayed on additional
thermometers and hygrometers in the cabin can deviate from the
displayed values on the control. This could be due to the following
reasons:
Depending on the cabin, the temperature differences from the floor to
the ceiling or from the oven to the opposite wall can be up to 60 K and
the differences in the relative humidity can be up to 40%.
Instruments with indicator needles react slower than electrical
measuring and display systems used for the control.
Installation instructions Sauna control Series FCU2x00/FCU3x00/FCU4x00 / Version V 2.18