Voltage And Switching Capacity - Electrical Load - Fasel Elektronik FCU2000 Series Installation Instructions Manual

Technical Data
2.2

Voltage and switching capacity - electrical load

Designation
Nominal voltage
Oven
1)
Evaporator
2)
Infrared
PS1 (FLE-STB)
Fan
Cabin light
Cleaning light
Coloured light
3)
OUT 1 ... OUT 4
3)
OUT 5 ... OUT 12
IN 1 ... IN 4, IN 9 ... 12
3)
IN 5 ... IN 8
Table 2: Technical data – voltages and switching capacity consumer
1) Only in controls with the bathing option "Sauna with humidity" (Series FCU2200, FCU3200, FCU3400, FCU4200 and
FCU4400)
2) Only in controls with the bathing option "Infrared" (Series FCU3400 and FCU4400)
3) Optional
Maximum EN 60335-2-53 allows the following capacity for sauna oven (Sauna heating device)
capacity and evaporator. Prefabricated sauna equipment is checked as per this standard
specification.
Sauna oven and
evaporator
Cabin cubatore [m
Table 3: Maximum capacity of sauna oven and evaporator
10
Type
FCU2x00
400 V 3 N ~ 50Hz
3x 230 V~ max. 3x 3 kW (AC1) / 3x 0,55kW (AC3) / 3x 0,75kW (AC15)
230 V~ max. 3 kW (Inrush current max. 30A for 5ms)
230 V~ max. 3 kW (Inrush current max. 30A for 5ms)
230 V~ max. 60 W (Inrush current max. 10A for 5ms)
230 V~ max. 120 W (Inrush current max. 10A for 5ms)
230 V~ max. 120 W (Inrush current max. 10A for 5ms)
230 V~ max. 120 W (Inrush current max. 10A for 5ms)
230 V~ / max. 120 W per relay / total capacity see circuit diagram
Potential free, safety extra low voltage max. 50 V / 1 A,
230 V~ / max. 120 W per relay; total capacity see circuit diagram (Inrush
current max. 6A for 5ms)
3)
safety extra low voltage approx. 15 V, switching current approx. 10 mA ,
230 V~ 50 Hz, all inputs same phase
3
]
6
7,5
11
26
Installation instructions Sauna control Series FCU2x00/FCU3x00/FCU4x00 / Version V 2.18
FCU3x00
(Inrush current max. 30A for 5ms)
(Inrush current max. 80A for 20ms)
Maximum
capacity
Sauna oven [kW]
5
6
9
21
FCU4x00
Maximum
capacity
evaporator [kW]
1,5
2
3
7