Setting An Entry Queue As Default - Polycom DOC2231A Getting Started Manual

MGC+50/MGC+100 Getting Started Guide

Setting an Entry Queue as Default

A default Entry Queue can be defined for the MCU, regardless of the dialed
IP card. The new default Entry Queue can be either a video Entry Queue or an
Audio Only Entry Queue. Participants are automatically routed to the default
Entry Queue when dialing one of the following strings:
•
•
•
•
•
•
To set an Entry Queue as default:
•
7-4
The new Entry Queue is added to the Meeting Rooms, Entry Queues &
SIP Factories list.
Network Service Prefix##Numeric ID when the numeric ID is incorrect
Network Service Prefix##Numeric ID##Password when the numeric ID
is incorrect
Network Service Prefix only
IP address of IP card##Numeric ID when the numeric ID is incorrect
IP address of IP card##Numeric ID##Password when the numeric ID is
incorrect
IP address of the IP card only
In the Meeting Rooms and Entry Queues list, right-click the Entry Queue
and select Set as Default.
The default Entry Queue is identified by a bold name.