Hardware Installation; Mgc+100 Hardware Installation; Inspecting The Mgc+/Readimanager Iam Package Contents; System Safety - Polycom DOC2231A Getting Started Manual

Chapter 2 - Hardware Installation

MGC+100 Hardware Installation

Inspecting the MGC+/ReadiManager IAM Package Contents

System Safety

General Safety Precautions

2-2
You should inspect the shipped box and note if it was damaged in any way. If
the box items show damage, you should file a damage claim with the carrier
who delivered it.
When deciding on a setup location for the MGC+, refer to the section
"System Safety" on page 2-2.
Disclaimer
Polycom is not responsible for damage sustained during shipment of this
product.
This section includes the follow topics related to system safety:
• "General Safety Precautions" on page 2-2
• "Rack Mount Safety Precautions" on page 2-3
"Polycom MGC+/ReadiManager Precautions" on page 2-3
•
Follow these rules to ensure general safety:
• Keep the area around the Polycom ReadiConvene clean and free of
clutter.
The MGC+50 weighs approximately 24 kg (53 lbs) and the MGC+100
•
weighs approximately 48 kg (106 lbs). When lifting the system, two
people at either end should lift slowly with their feet spread out to
distribute the weight. Always keep your back straight and lift with your
legs.