Using A Keyboard And Monitor Attached To The Mgc+ Unit - Polycom DOC2231A Getting Started Manual

Using a Keyboard and Monitor Attached to the MGC+ unit

The MCU Properties dialog box opens.
b. Enter the IP address of the MCU as you have defined in the IP
Configuration.
c. Click OK.
14. Connect to the MCU.
1. Access the Main Control Module rear I/O panel and connect the
keyboard and the monitor to the appropriate ports.
MGC+50/MGC+100 Getting Started Guide
The current MCU name.
To modify, type a new
name
MCU IP address. Enter
the IP address of the MCU
as allocated by the
network administrator
2-19