Polycom DOC2231A Getting Started Manual page 43

Chapter 3 - MGC+ Software Installation and Configuration
Table 3-1: IP Configuration Parameters (Continued)
Field Description
Cards Click this button to automatically detect the IP address
Configuration and Alias (if known) of the IP+ cards installed on the
MCU.
The IP+ card type and its slot number, IP address and
alias are listed. When the Obtain IP Address
automatically (DHCP) check box is selected, the IP
address of the card appears as 0.0.0.0.
To configure a specific IP+ card:
Highlighting and then double clicking on any card.
Enter or change the IP address, and add the card's
Alias if required and click OK.
Subnet Mask Enter the subnet mask of the MCU's IP+ card. If the
DHCP is used, the subnet mask is automatically
retrieved from the DHCP server and cannot be
modified. For more details, see the MGC Administrators
Guide, Chapter 3, "Defining an IP Network Service".
3-11