Arming And Disarming Motors; Auto Takeoff/Auto Land - Hubsan H507A X4 STAR PRO User Manual

4-4 Arming and disarming motors

When the mobile device, transmitter and aircraft have been
bound together properly, users may control the aircraft directly
with the HT009 transmitter.
Arming/starting motors
Simultaneously pull the transmitter joysticks diagonally down-
out to arm the motors (as shown in the side figure).
Disarming/stopping motors
Pull the throttle joystick all the way down until the copter has
completed its descent on the ground. Simultaneously pull
the transmitter joysticks diagonally down-out to disarm the
motors (as shown in the side figure).
Do not disarm during flight. The motors will stop in midair, causing the aircraft to fall and other such
hazards.
Be sure to operate the virtual joysticks slowly and firmly. When disarming, wait until the motors
come to a complete stop before releasing the joysticks.

4-5 Auto Takeoff/Auto Land

When the transmitter status LED is solidly lit, users may use the Auto Takeoff/Auto Land functions.
Follow the below instructions to use both functions.
Auto Takeoff
Please confirm that conditions are safe for take-off. Then, long
press the Auto Takeoff key and the aircraft will automatically
take off, maintaining a height of around 2 meters. Note that
when the aircraft is airborne, the Auto Takeoff key will become
an Auto Land.
Auto Land
Please confirm that conditions are safe for a landing. Then,
long press the Auto Land key. The aircraft will descend
automatically, land and disarm.
12