Return To Home - Hubsan H507A X4 STAR PRO User Manual

Parameters Controller
Bluetooth connection settings
Open the remote control switch, click "Refresh" button
to refresh the Bluetooth list
hubsan HT009_XXXXXX
Refresh
4. The interface will then show the "Bluetooth connection settings" menu.
Select the HUBSAN HT009_XXXXXX and confirm to connect.
5) Confirm that flight and takeoff conditions are safe. Proceed to either manually arm the drone's motors
for flight, or use the Auto Takeoff function. Upon finishing a flight, users may use the Auto Land option or
land and disarm manually.
6) After a safe landing, users may power off the aircraft and transmitter after the motors have reached a
complete stop.

4-8 Return to Home

Return to Home mode will only work when the aircraft has 6 or more satellites. Otherwise, the unit will
not able to return; it will malfunction.
Entering Return to Home mode
Long press the Return to Home button for 1.5 seconds and the
quadcopter will perform a Return to Home. The flight control
system will command the aircraft to return to its designated
"home" point. Users can either allow the flight system to land
the aircraft automatically, or exit Return to Home and land the
aircraft manually.
Exiting Return to Home
To terminate Return to Home, short press for 0.5 seconds. Users may then continue to fly or land the
aircraft manually.
Use this function only if the aircraft has 6 or more GPS satellites.
Map Relay Others
Connect
15
Turn on Bluetooth
An app on your device wants to
turn on Bluetooth and make your
device d iscoverable by o ther
devices for 250 seconds. Allow?
DENYA LLOW
3. The device will request permission to
use Bluetooth. Tap "Allow" to continue.