Display Qos Policy Control-Plane Pre-Defined - HPE FlexFabric 5940 Series Command Reference Manual

Classifier: 2
Operator: AND
Rule(s) :
If-match protocol ipv6
Behavior: 2
Accounting enable:
0 (Packets)
Filter enable: Permit
Marking:
Remark dscp 3
Classifier: 3
Operator: AND
Rule(s) :
-none-
Behavior: 3
-none-
Table 20 Command output
Field
Direction
Green packets
Yellow packets
Red packets
For the description of other fields, see

display qos policy control-plane pre-defined

Use display qos policy control-plane pre-defined to display predefined control plane QoS
policies.
Syntax
display qos policy control-plane pre-defined [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays predefined control plane QoS policies for all member devices.
Examples
# Display the predefined control plane QoS policy of slot 1.
<Sysname> display qos policy control-plane pre-defined slot 1
Pre-defined policy information slot 1
Protocol
Description
Inbound direction on the control plane.
Statistics about green packets.
Statistics about yellow packets.
Statistics about red packets.
Table 15
Priority Bandwidth
57
and Table 18.
Group