Display Buffer Usage - HPE FlexFabric 5940 Series Command Reference Manual

Parameters
slot slot-number: Specifies an IRF member device by its member ID (slot number). If you do not
specify an IRF member device, this command displays buffer size settings for all IRF member
devices.
queue queue-id: Specifies a queue by its number in the range of 0 to 7. If you specify a queue, this
command displays the fixed-area ratio and shared-area ratio for the specified queue. If you specify
the queue keyword without the queue-id argument, this command displays the fixed-area ratio and
shared-area ratio for each queue. If you do not specify the queue keyword, this command displays
the total shared-area ratio.
Examples
# Display buffer size settings.
<Sysname> display buffer
Slot Type
1 cell
Total-shared: Size of the shared buffer for all ports
Unit: Ratio
# Display the fixed-area ratio and shared-area ratio for the queues.
<Sysname> display buffer queue
Slot Queue
1 0-7
Guaranteed: Size of the minimum guaranteed buffer per queue
Shared: Size of the maximum shared buffer per queue
Unit: Ratio
Table 43 Command output
Field
Type
Queue
Eg
(Total-shared , Shared)
(Guaranteed , Shared)

display buffer usage

Use display buffer usage to display buffer usage.
Syntax
display buffer usage [ slot slot-number ]
Eg(Total-shared)
99
Eg: Size of the sending buffer
Type Eg(Guaranteed , Shared)
cell 13 , 88
Eg: Size of the sending buffer
Description
Resource type: packet or cell.
Queue ID in the range of 0 to 7.
Egress buffer.
Total-shared indicates the total shared-area ratio.
If the device does not support a resource type, this
field displays two hyphens (--).
•
Guaranteed indicates the fixed-area ratio of a
queue.
If the device does not support a resource type,
this field displays two hyphens (--).
•
Shared indicates the shared-area ratio of a
queue.
If the device does not support a resource type,
this field displays two hyphens (--).
117