Display Packet-Filter Verbose - HPE FlexFabric 5940 Series Command Reference Manual

Inbound policy:
IPv4 ACL 2000
Totally 2 packets permitted, 0 packets denied
Totally 100% permitted, 0% denied
Table 4 Command output
Field
Sum
Inbound policy
Outbound policy
IPv4 ACL 2001
2 packets
Totally 2 packets permitted, 0 packets
denied
Totally 100% permitted, 0% denied
Related commands
reset packet-filter statistics

display packet-filter verbose

Use display packet-filter verbose to display ACL application details for packet filtering.
Syntax
display packet-filter verbose interface interface-type interface-number { inbound | outbound }
[ [ ipv6 | mac ] { acl-number | name acl-name } ] [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. The slot
slot-number option is not available for an Ethernet interface.
inbound: Specifies the inbound direction.
outbound: Specifies the outbound direction.
ipv6: Specifies the IPv6 ACL type.
mac: Specifies the Layer 2 ACL type.
acl-number: Specifies an ACL by its number.
•
2000 to 2999 for basic ACLs.
•
3000 to 3999 for advanced ACLs.
•
4000 to 4999 for Layer 2 ACLs.
Description
Accumulated packet filtering statistics.
Accumulated packet filtering statistics in the inbound direction.
Accumulated packet filtering statistics in the outbound direction.
Accumulated packet filtering statistics of IPv4 basic ACL 2001.
Two packets matched the rule.
This field is not displayed when no packets matched the rule.
Number of packets permitted and denied by the ACL.
Ratios of permitted and denied packets to all packets.
12