Qos Apply Policy (User Profile View); Qos Apply Policy Global - HPE FlexFabric 5940 Series Command Reference Manual

Examples
# Apply QoS policy USER1 to the outgoing traffic of Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] qos apply policy USER1 outbound
# Apply QoS policy aaa to the incoming traffic of the control plane of slot 3.
<Sysname> system-view
[Sysname] control-plane slot 3
[Sysname-cp-slot3] qos apply policy aaa inbound

qos apply policy (user profile view)

Use qos apply policy to apply a QoS policy to a user profile.
Use undo qos apply policy to remove a QoS policy applied to a user profile.
Syntax
qos apply policy policy-name { inbound | outbound }
undo qos apply policy policy-name { inbound | outbound }
Default
No QoS policy is applied to a user profile.
Views
User profile view
Predefined user roles
network-admin
Parameters
policy-name: Specifies a QoS policy by its name, a case-sensitive string of 1 to 31 characters.
inbound: Applies the QoS policy to the incoming traffic of the device (traffic sent by online users).
outbound: Applies the QoS policy to the outgoing traffic of the device (traffic received by online
users).
Usage guidelines
Deleting a user profile also removes the QoS policies applied to the user profile.
Examples
# Apply QoS policy test to incoming traffic of user profile user.
<Sysname> system-view
[Sysname] user-profile user
[Sysname-user-profile-user] qos apply policy test outbound

qos apply policy global

Use qos apply policy global to apply a QoS policy globally.
Use undo qos apply policy global to remove a globally applied QoS policy.
Syntax
qos apply policy policy-name global { inbound | outbound }
67