Display Qcn Global - HPE FlexFabric 5940 Series Command Reference Manual

Passed
Discarded: 20 (Packets)
CNM count: 3000 (Packets)
Table 45 Command output
Field
Passed
Discarded
CNM count
Related commands
reset qcn cp interface

display qcn global

Use display qcn global to display the global CND settings.
Syntax
display qcn global [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays the global CND settings for the master device.
Examples
# Display the global CND settings.
<Sysname> display qcn global
Slot 1:
QCN global status: Enabled
CNPV Mode
---------------------------------------------------
1 admin
2 auto
3 auto
Table 46 Command output
Field
Mode
Defense-mode
: 200000 (Packets)
Description
Number of packets allowed to pass through.
Number of packets discarded.
Number of CNMs sent.
Defense-mode
interior-ready
-
-
Description
Indicates the way how the interface selects the defense mode:
•
auto—The interface negotiates the defense mode by using LLDP.
•
admin—The interface uses a user-configured defense mode.
Defense mode of the interface:
•
disabled—Disables congestion notification and performs priority mapping
according to the priority mapping table.
Alternate CP-profile
4 default
0 1
0 1
120