Qcn Priority Profile - HPE FlexFabric 5940 Series Command Reference Manual

interior: Specifies the interior defense mode. This mode does not alter the priority of incoming
frames with a specific CNPV and removes CN tags before sending out the frames.
interior-ready: Specifies the interior-ready defense mode. This mode does not alter the priority of
incoming frames with a specific CNPV and retains CN tags when sending out the frames.
alternate alternate-value: Specifies an alternate value in the range of 0 to 7. The default value for the
alternate-value argument is 0. The alternate value cannot be equal to a CNPV.
auto: Configures the device to negotiate the defense mode by using LLDP.
Usage guidelines
When you configure the auto keyword, the alternate value is the priority value that is closest to but
smaller than the CNPV. For example, if you set the CNPV to 5, the alternative value is 4. If all priority
values smaller than the CNPV are used as CNPVs, the alternate value is the priority value that is
closest to but greater than the CNPV.
Examples
# Assign a device to the CND with CNPV 2.
<Sysname> system-view
[Sysname] qcn priority 2 auto
# Assign a device to the CND with CNPV 1.
<Sysname> system-view
[Sysname] qcn priority 1 admin defense-mode disabled alternate 0
Related commands
qcn port priority

qcn priority profile

Use qcn priority profile to bind a profile to a CND.
Use undo qcn priority profile to unbind a profile from a CND.
Syntax
qcn priority priority profile profile-id
undo qcn priority priority proflie
Default
The default profile (profile 0) is bound to a CND.
Views
System view
Predefined user roles
network-admin
Parameters
priority: Specifies a priority value (CNPV) in the range of 0 to 7.
profile-id: Specifies a profile by its ID.
Usage guidelines
If the device has not been assigned to the CND or the specified profile does not exist, the binding
fails.
Examples
# Bind profile 2 to the CND with CNPV 2.
125