Reset Qos Car Name - HPE FlexFabric 5940 Series Command Reference Manual

An aggregate CAR action takes effect only after it is applied to an interface or used in a QoS policy.
Examples
# Configure aggregate CAR action aggcar-1, where CIR is 25600, CBS is 512000, and red packets
are dropped.
<Sysname> system-view
[Sysname] qos car aggcar-1 aggregative cir 25600 cbs 512000 red discard
Related commands
display qos car name

reset qos car name

Use reset qos car name to clear the statistics about aggregate CAR actions.
Syntax
reset qos car name [ car-name ]
Views
User view
Predefined user roles
network-admin
Parameters
car-name: Specifies an aggregate CAR action by its name. This argument must start with a letter,
and is a case-sensitive string of 1 to 31 characters. If you do not specify an aggregate CAR action,
this command clears statistics for all aggregate CAR actions.
Examples
# Clear the statistics about aggregate CAR action aggcar-1.
<Sysname> reset qos car name aggcar-1
109