Remark Customer-Vlan-Id - HPE FlexFabric 5940 Series Command Reference Manual

Views
Traffic behavior view
Predefined user roles
network-admin
Parameters
cpu: Redirects traffic to the CPU.
interface interface-type interface-number: Redirects traffic to an interface specified by its type and
number.
slot slot-number: Redirects traffic to an IRF member device specified by its member ID.
Usage guidelines
If you execute the redirect command multiple times in the same traffic behavior, the most recent
configuration takes effect.
A traffic redirecting action can be applied only to the inbound direction.
Examples
# Configure redirecting traffic to Ten-GigabitEthernet 1/0/1 in traffic behavior database.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] redirect interface ten-gigabitethernet 1/0/1
Related commands
classifier behavior
qos policy
traffic behavior

remark customer-vlan-id

Use remark customer-vlan-id to configure a CVLAN marking action in a traffic behavior.
Use undo remark customer-vlan-id to restore the default.
Syntax
remark customer-vlan-id vlan-id
undo remark customer-vlan-id
Default
No CVLAN marking action is configured.
Views
Traffic behavior view
Predefined user roles
network-admin
Parameters
vlan-id: Specifies a CVLAN ID in the range of 1 to 4094.
Examples
# Configure traffic behavior b1 to mark matching packets with CVLAN 111.
<Sysname> system-view
47