Qos Bandwidth Queue - HPE FlexFabric 5940 Series Command Reference Manual

Parameters
interface-type interface-number: Specifies an interface by its type and number. If you do not specify
an interface, this command displays the WFQ configuration of all interfaces.
Examples
# Display the WFQ configuration of Ten-GigabitEthernet 1/0/1.
<Sysname> display qos wfq interface ten-gigabitethernet 1/0/1
Interface: Ten-GigabitEthernet1/0/1
Output queue: Hardware Weighted Fair Queuing
Queue ID
--------------------------------------------------------------------------------
0
1
2
3
4
5
6
7
Table 35 Command output
Field
Interface
Output queue
Group
Byte-count
Min Bandwidth

qos bandwidth queue

Use qos bandwidth queue to set the minimum guaranteed bandwidth for a queue on an interface.
Use undo qos bandwidth queue to restore the default.
Syntax
qos bandwidth queue queue-id min bandwidth-value
undo qos bandwidth queue queue-id
Default
The minimum guaranteed bandwidth for a queue is 0 kbps.
Views
Layer 2/Layer 3 Ethernet interface view
Predefined user roles
network-admin
Queue name Group
be 1
af1 1
af2 1
af3 1
af4 1
ef 1
cs6 1
cs7 1
Description
Interface type and interface number.
Type of the current output queue.
Number of the group that holds the queue. By default, all queues are in
group 1.
Byte-count scheduling weight of the queue.
Minimum guaranteed bandwidth for the queue.
Byte count
1
1
1
1
1
1
1
1
89
Min Bandwidth
0
0
0
0
0
0
0
0