Priority Trust Mode Commands; Display Qos Trust Interface - HPE FlexFabric 5940 Series Command Reference Manual

Views
System view
Predefined user roles
network-admin
Parameters
For the description of other keywords, see
Examples
# Enter 802.1p-local priority map view.
<Sysname> system-view
[Sysname] qos map-table dot1p-lp
[Sysname-maptbl-dot1p-lp]
Related commands
display qos map-table
import

Priority trust mode commands

display qos trust interface

Use display qos trust interface to display the priority trust mode and port priorities of an interface.
Syntax
display qos trust interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If you do not specify
an interface, this command displays the priority trust mode and port priorities of all interfaces.
Examples
# Display the priority trust mode and port priority of Ten-GigabitEthernet 1/0/1.
<Sysname> display qos trust interface ten-gigabitethernet 1/0/1
Interface: Ten-GigabitEthernet1/0/1
Port priority trust information
Port priority:4
Port priority trust type: dscp
Table 28 Command output
Field
Interface
Port priority
Table 26.
Description
Interface type and interface number.
Port priority set for the interface.
74