Acl Trap Interval - HPE FlexFabric 5940 Series Command Reference Manual

undo acl logging interval
Default
The interval is 0. The device does not generate log entries for packet filtering.
Views
System view
Predefined user roles
network-admin
Parameters
interval: Specifies the interval at which log entries are generated and output. It must be a multiple of
5, in the range of 0 to 1440 minutes. To disable the logging, set the value to 0.
Usage guidelines
The logging feature is available for IPv4 or IPv6 ACL rules that have the logging keyword.
You can configure the ACL module to generate log entries for packet filtering and output them to the
information center at the output interval. The log entry records the number of matching packets and
the matched ACL rules. If an ACL is matched for the first time, the device immediately outputs a log
entry to record the matching packet. For more information about the information center, see Network
Management and Monitoring Configuration Guide.
Examples
# Configure the device to generate and output packet filtering log entries every 10 minutes.
<Sysname> system-view
[Sysname] acl logging interval 10
Related commands
rule (IPv4 advanced ACL view)
rule (IPv4 basic ACL view)
rule (IPv6 advanced ACL view)
rule (IPv6 basic ACL view)

acl trap interval

Use acl trap interval to enable SNMP notifications for packet filtering and set the interval.
Use undo acl interval to restore the default.
Syntax
acl trap interval interval
undo acl trap interval
Default
The interval is 0. The device does not generate SNMP notifications for packet filtering.
Views
System view
Predefined user roles
network-admin
4