Economy Setting; Set Temp. Auto Return Setting - Fujitsu UTY-RVN*M Operating Manual

3-2-2. Economy setting

In "Function" screen, select [Economy] with the [Cursor
1
button (Up/Down)].
Function
Air flow direction
Economy
Set temp. auto return
Set temp. range
Back:
To change the setting, press the [Enter button].
Select [On] or [Off] by pressing the [Cursor button
2
(Up/Down)], and press the [Enter button] to complete
the setting.
Function
Air flow direction
Economy
Set temp. auto return
Set temp. range
Cancel:
When you return to the "Monitor" screen, the icon is displayed.
To check the function, press the [Enter button] and select the
icon.
Monitor
Economy
Cool
Menu

3-2-3. Set temp. auto return setting

In "Function" screen, select [Set temp. auto return] with
1
the [Cursor button (Up/Down)].
Function
Air flow direction
Economy
Set temp. auto return
Set temp. range
Back:
To change the setting, press the [Enter button].
En-9
Mo 10:00
Off
Disable
Disable
Setting:
Timer
Mo 10:00
On
Disable
Disable
OK:
Timer
Mo 10:00
26
° C
High
End:
Mo 10:00
Off
Disable
Disable
Setting:
Timer
"Set temp. auto return" screen is displayed.
2
Set temp. auto return
Enable/Disable setting
Return time and temp. setting
Cool/Dry
Heat
Back: Setting:
Air flow dire...
Select the item with the [Cursor button (Up/Down)], and
press the [Enter button].
For [Enable/Disable setting], select [Enable] or [Disable]
3
with the [Cursor button (Up/Down)], and press the [Enter
button] to complete the setting.
Set temp. auto return
Enable/Disable setting
Return time and temp. setting
Cool/Dry
Heat
Cancel:
Air flow dire...
For [Return time and temp. setting], select operation
4
mode with the [Cursor button (Up/Down)], and press
the [Enter button]. Adjust the value with the [Cursor but-
ton (Up/Down)].
With the [Cursor button (Left/Right)], the cursor can be
switched [Time] and [Temp].
Set temp. auto return
Enable/Disable setting
Return time and temp. setting
Cool/Dry
Heat
Cancel:
Air flow dire...
To complete the setting, press the [Enter button]. To re-
turn to the "Function" screen, press the [Cancel button].
Notes
• The set time can be set from 30 to 120 minutes in
units of 10 minutes.
• Possible temperature setting ranges in the operation
mode are as follows:
Cool, Dry .......................... 18 to 30 °C (64 to 88 °F)
Heat .................................. 16 to 30 °C (60 to 88 °F)
• If any ranges have been set in [Set temp. range]
setting, adjustable temperature range in this setting
follows the restricted range.
• If you set any ranges in the [Set temp. range] setting
after setting of [Set temp. auto return], the restricted
range set in the [Set temp. range] also overrides [Set
temp. auto return] setting.
• Even if the temperature setting change is done on
the secondary remote controller, it returns to the set
value in [Set temp. auto return] on the primary remote
controller.
Mo 10:00
Disable
Time / Temp.
30min. / / 26
° C
26
30min. /
° C
Set temp. range
Mo 10:00
Enable
Time / Temp.
30min. / / 26
° C
30min. / 26
° C
OK:
Set temp. range
Mo 10:00
Enable
Time / Temp.
30min. 26
° C
26
30min.
° C
OK:
Set temp. range