Table of Contents
Advertisement
User Guide for the Polycom VVX 1500 C Business Media Phone for Cisco Unified Communications Manager (SIP)
Note
Note
30
To dial a number using the handset:
>> Do one of the following:
— Pick up the handset, and then enter the phone number.
Your system administrator sets up your phone to automatically place the call after
you enter a certain number of digits. If your phone does not automatically place the
call after you enter a phone number, tap the Send soft key.
If the call is placed before you enter all the digits, you have to place the call as
follows: enter the phone number, tap the Dial soft key, and then pick up the
handset.
or
— Enter the phone number, tap the Dial soft key, and then pick up the
handset.
To dial a URL or IP address using the handset:
Pick up the handset.
1
Tap the URL soft key.
2
Enter the URL or IP address. (See
3
page 14.)
Tap the Send soft key.
4
Calling Using the Speakerphone
You can use the speakerphone to dial a number, URL, or IP address.
If your speakerphone doesn't work, your system administrator may have disabled it.
You must handle calls using the handset or a headset.
If your system administrator disables the speakerphone on your phone, "Handsfree
mode disabled" appears on the touch screen after you press
"Entering Data and Editing Fields"
on
.
Polycom, Inc.
Advertisement
Table of Contents
