Table of Contents
Advertisement
Changing When and How Video Displays
Note
Polycom, Inc.
To change the way the PIP displays:
Tap
> Settings > Basic > Video > Local Camera View.
1
From the Local Camera View screen, tap, and then adjust the following
2
settings:
— Local Camera View (Full Screen)
Enables or disables the PIP from displaying when you view the near
or far site on the full screen.
To select the setting you want, tap the field, and then tap the field's
highlighted box. From the drop-down list, tap Enabled or Disabled.
The default setting is Enabled.
— Local Camera View Mode (Full Screen)
Sets whether you want the PIP to display over or next to full screen
video.
You can select these settings:
Side-by-Side—Displays the PIP next to (rather than over) the full
screen video.
PIP—Displays the PIP over the full screen video.
The default setting is Side-by-Side.
If you select "PIP," as well as update the way full screen video displays (by choosing
"Full" or "Crop" mode), the full screen video will display on the entire screen (without
black sidebars). To choose "Full" or "Crop" mode, see
Video Displays"
on page 128.
To select the setting you want, tap the field, and then tap the field's
highlighted box. From the drop-down list, tap Side-by-Side or PIP.
Tap the Save soft key.
3
Customizing the Phone Display
"Changing How Non-PIP
131
Advertisement
Table of Contents
