Chapter 2- Qsx Overview; Qsx Equipment Overview; Qsx 400 Components - Polycom QSX 3725-22370-001/B Administrator's Manual

Chapter 2- QSX Overview

QSX Equipment Overview

There are two basic versions of the QSX. The QSX 400 is designed to work in
environments without a conference phone or with Polycom's analog SoundStation,
SoundStation2, SoundStation Premier or SoundStation2W conference phones. The QSX
300 is specifically designed to work with the Polycom VTX 1000 conference phone. The
QSX 300 does not require a content controller because that functionality has been
designed into the VTX 1000 phone and can be accessed through the menus on the phone
itself.

QSX 400 Components

When sharing content between two QSX units, you will need one Polycom conference
phone connected to each QSX for the session. If only sharing content with web viewers,
it is not required to connect a phone to the QSX.
Name
QSX system base
Content controller with 25-foot
(~8.5 meters) VGA Cable
3 foot VGA Extension
LAN Cable
Power Supply and Power Cable
8-wire cable for phone console
Serial Cable (straight through)
Mounting Brackets
Component
9
Description
Adds content sharing to phone
calls. The base can be mounted
on a rack, under a table, or on a
wall, or it can be placed on a
tabletop.
Allows the presenter to send
content with the push of a button.
Connects the QSX system to a
computer or other VGA source.
Connects the QSX system to the
IP network.
Connects power to the QSX
system base.
Connects the QSX system's 8-
wire connector to the conference
phone.
Connects to the serial port on the
QSX. Used for setting static IP if
required and HyperTerminal is
not available.
Includes screws and four brackets
for mounting the QSX system
base under a table or on a wall.