Settings
Baud Rate
RS-232 Mode
(default: Debug)
RS-232 Flow Control
Bandwidth
One of the primary variables that can affect the quality of a QSX-based content sharing
session is bandwidth. Different participants may be connected at different speeds.
Alternately, the total available bandwidth may not be sufficient for all participants to use
the maximum transmit and receive rates. As a result, QSX 2.0 provides a number of
enhancements for how bandwidth can be used.
To configure the Bandwidth settings described below, follow these steps:
1. Log on to the QSX Admin Web as described on
2. Go to Admin Settings > Table of Contents > General Settings > Bandwidth
3. Configure the settings.
4. Click on the Update button.
Settings
Web Viewer Bandwidth Usage
(default: Bandwidth Sharing )
Maximum Average Transmit Bandwidth
(default:1920 Kbps)
Maximum Average Receive Bandwidth
(default:1920 Kbps)
Description
Fixed at 115200.
Control or Debug
Fixed at None.
Page
23.
Description
Specifies how you want to allocate bandwidth for web
viewers. There are two options:
Bandwidth Sharing - For use in normal corporate LAN
environments.
Time Sharing - For use in which web viewers are
accessing the QSX session from a low-bandwidth
connection.
For more details on bandwidth, please see Appendix A.
Specifies the maximum amount of bandwidth that you
wish to use when transmitting content from the QSX to
other meeting participants.
Specifies the maximum amount of bandwidth that you
wish to use when receiving content from another QSX
unit.
33