Clear Forwarding On A Line; Do Not Disturb (Reject All Incoming Calls); Clear Do Not Disturb; Redial The Last Number You Dialed - SpectraLink SNP2400 User Manual

Clear forwarding on a line

Do Not Disturb (reject all incoming calls)

Clear Do Not Disturb

Redial the last number you dialed

Adjust the headset volume

End the call

1725-36027-001_C.doc
Using the Basic Features of Your SpectraLink 8002 Wireless Telephone
1. Press + [the line number],
LINE
2. Press the softkey and enter the forwarding destination.
Fwd
3. Press the softkey again.
Fwd
Press . The handset will not ring for new incoming calls.
FCN 2
When the do-not-disturb feature is enabled, the standby screen will
display .
Do Not Disturb
Press again to resume ringing.
FCN 2
1. Press .
START
2. Press .
Redl
3. Verify that the displayed number is the one you want and the line
# is valid.
4. Press .
START
While the headset is plugged in, press the up/down volume buttons
on the side of the handset during the call.
Press the key to return to the standby mode.
END
35