Dante Operation - Extron electronics AXI 22 AT Setup Manual

Audio expansion interfaces
Hide thumbs Also See for AXI 22 AT:
Table of Contents

Advertisement

Dante Operation

Dante Transmitters and Receivers
A Dante network is comprised of transmitters that output digital audio onto the Dante network and receivers that receive digital
audio from the Dante network.
The AXI 22 AT and AXI 44 AT mic/line inputs are Dante transmitters because the analog audio input is converted into digital audio
and transmitted onto the Dante network.
The AXI 22 AT and AXI 44 AT analog outputs are Dante receivers because they receive digital audio from the Dante network and
output that signal as analog audio via the line outputs.
Network View Layout
Dante transmitters are listed horizontally across the top of the
Network View window (see
Dante receivers are listed vertically on the left side of the window (
Creating a link in the connection matrix (
Dante transmitter to a Dante receiver.
Routing Transmitters and Receivers
Click the + box next to the device with the desired Dante
1.
transmitters (AXI44AT-ConfRm1 in the example to the right).
The available transmitters display horizontally.
Click the + box next to the device with the desired Dante
2.
receivers (DMP128PlusRackTop EXP_IN-01 in the example to
the right). The available receivers display vertically.
Click the junction of the desired connection in the connection
3.
matrix.
Example: AXI44-ConfRm1 Mic/Line In 1 to
DMP128PlusRackTop EXP_IN-01 (shown to the right).
A green check mark at the junction indicates the connection is
made. A check mark is also placed next to the receiver channel
(if a green check mark does not appear, refer to the Dante
Controller section of the AXI 22 AT and AXI 44 AT User Guide).
NOTE:
A transmitter can transmit signal to multiple
receivers, but a receiver can only receive signal from
one transmitter.
Click the junction again to disconnect the transmitter from the
4.
receiver.
Additional transmitters and receivers can be connected or disconnected using steps 1 through 4 as shown above (for additional
information on Dante Controller operation, see the Dante Controller section of the AXI 22 AT and AXI 44 AT User Guide at
www.extron.com).
Extron Headquarters
+800.633.9876 Inside USA/Canada Only
Extron USA - West
Extron USA - East
+1.714.491.1500
+1.919.850.1000
+1.714.491.1517 FAX
+1.919.850.1001 FAX
©
2017 Extron Electronics All rights reserved. All trademarks mentioned are the property of their respective owners.
1
in the figure to the right), while
) routes audio from a
3
Extron Europe
Extron Asia
Extron Japan
+800.3987.6673
+65.6383.4400
+81.3.3511.7655
Inside Europe Only
+65.6383.4664 FAX
+81.3.3511.7656 FAX
+31.33.453.4040
+31.33.453.4050 FAX
).
2
Extron China
Extron Middle East
+86.21.3760.1568
+971.4.299.1800
+86.21.3760.1566 FAX
+971.4.299.1880 FAX
Extron Australia
Extron India
+61.8.8113.6800
1800.3070.3777
+61.8.8351.2511 FAX
(Inside India Only)
+91.80.3055.3777
+91.80.3055.3737 FAX
68-2972-50 Rev. A
www.extron.com
05 17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Axi 44 at

Table of Contents