Extron electronics AXI 22 AT Setup Manual page 5

The main workspace provides access to input gain, phantom power, and output attenuation. It also provides a menu bar across
the top with additional configuration tools. For more information about using DSP Configurator, see the DSP Configurator
Software section of the AXI 22 AT and AXI 44 AT User Guide or the DSP Configurator Help, which can be accessed by selecting
Help > Contents or pressing <F1> on the keyboard. Most dialog boxes within DSP Configurator contain a context sensitive
Help button ( ) in the top right corner. Click this button to open the help file topic for that specific dialog box.
Naming the AXI 22 AT and AXI 44 AT
The AXI 22 AT and AXI 44 AT Dante unit names can be set from the Device Settings dialog box in DSP Configurator. The
Dante device name aids in device identification in the Dante Controller software when there are multiple Dante devices on the
audio network.
ATTENTION:
Dante devices must be renamed before audio connections are made. Renaming a device removes existing
audio connections.
To name the Dante device:
Open DSP Configurator and connect Live to the device (see step 5b on the previous page).
1.
Select Tools > Device Settings. The Device Settings dialog box
2.
opens to the Unit Info tab.
Enter a name for the AXI 22 AT or AXI 44 AT in the Unit Name field (see the
3.
figure to the right).
NOTES:
• The name applied in the Unit Name field is applied to the Dante
module and is the name that appears in Dante Controller.
• If the AXI has not been renamed, its default name consists of
the product name followed by a hyphen (AXI22-) plus the last 6
characters of the device MAC address (for example,
AXI22-0744c1).
Click Apply.
4.
AXI network configuration details can be viewed on the IP Settings tab of
5.
the Devices Settings dialog box.
Click OK to close the Device Settings dialog box.
6.
Dante network and audio configurations are made using Dante Controller (see
Downloading and Installing Dante Controller Software below for instructions on
downloading, installing, and operating Dante Controller).
NOTE:
Dante Devices can also be renamed using Dante Controller (see the AXI 22 AT and AXI 44 AT User Guide for more
information).
5