Connecting The Iuc180 Or 150 To The Kiosk Ground; Kiosk Mechanical Requirements - Ingenico iUC150 Integration Manual

6.5 CONNECTING THE IUC180 OR 150 TO THE KIOSK
GROUND
Ground studs to connect copper braid to ground.
Picture showing the grounding of the iUC180
To insure good connexion of iUC180 or iUC150 to the kiosk ground, it is
recommended to install one copper braid connecting the 2 grounding studs and
connect this braid to the chassis.

Kiosk mechanical requirements

See chapter 5.1
Intégration Guide_iUC150&iUC180 61/70 Copyright © 2012 Ingenico
900009816 R11 000 01/1223 All rights reserved