Sfp (Ppm) Description; Figure 2-11 Mylar Tab Sfp; Table 2-22 Sfp (Ppm) Compatibility - Cisco ONS 15600 Reference Manual

2.10.2 SFP (PPM) Description

Use only SFPs certified for use in Cisco Optical Networking Systems. The qualified Cisco SFP
Caution
pluggable module's top assembly numbers (TANs) are provided in
Table 2-22 SFP (PPM) Compatibility
Card
ASAP (ONS 15600 SONET/SDH) ONS-SE-2G-L2
To determine the line rates supported by each SFP, see the
page
2.10.2 SFP (PPM) Description
SFPs (PPMs) are integrated fiber optic transceivers that provide high-speed serial links from a port or
slot to the network. Various latching mechanisms can be utilized on the SFP modules. There is no
correlation between the type of latch to the model type (such as SX or LX/LH) or technology type (such
as Gigabit Ethernet). See the label on the SFP for technology type and model. One type of latch available
is a Mylar tab as shown in
(Figure
SFP dimensions are:
•
•
•
SFP temperature ranges for are:
•
•
•
Figure 2-11
Cisco ONS 15600 Reference Manual, R6.0
2-26
Compatible SFP
(Cisco Product ID)
ONS-SE-Z1
ONS-SI-622-L2
ONS-SI-155-L2
ONS-SC-2G-46.1 through 60.6
ONS-SC-2G-30.3 through 44.5
A-12.
Figure
2-12), and a third type of latch is a bail clasp
Height 0.03 in. (8.5 mm)
Width 0.53 in. (13.4 mm)
Depth 2.22 in. (56.5 mm)
COM—Commercial operating temperature range –5 to 70 degrees C
EXT—Extended operating temperature range –5 to 85 degrees C
IND—Industrial operating temperature range –40 to 85 degrees C
Mylar Tab SFP
Cisco Top Assembly Number (TAN)
10-2013-01
10-1971-01
10-1936-01
10-1937-01
10-2170-01 through 10-2184-01, and 10-2186-01
10-2155-01 through 10-2169-01, and 10-2185-01
"A.3 SFP Specifications" section on
2-11, a second type of latch available is an actuator/button
(Figure
Chapter 2
Table 2-22.
2-13).
Card Reference