Oc48/Stm16 Sr/Sh 16 Port 1310 Card-Level Indicators; Oc48/Stm16 Sr/Sh 16 Port 1310 Network-Level Indicators; Oc48/Stm16 Sr/Sh 16 Port 1310 Card Ogi Connector Pinout; Table 2-10 Oc48/Stm16 Sr/Sh 16 Port 1310 Card-Level Indicators - Cisco ONS 15600 Reference Manual

Hide thumbs Also See for ONS 15600:
Table of Contents

Advertisement

Chapter 2
Card Reference

2.5.3 OC48/STM16 SR/SH 16 Port 1310 Card-Level Indicators

Table 2-10
card.
Table 2-10
Indicator
STAT LED
SRV LED
LASER ON

2.5.4 OC48/STM16 SR/SH 16 Port 1310 Network-Level Indicators

Table 2-11
card.
Table 2-11
Indicator
SD LED
SF LED

2.5.5 OC48/STM16 SR/SH 16 Port 1310 Card OGI Connector Pinout

Table 2-12
Table 2-12
OC48/STM16 SR/SH 16 Port 1310 Card OGI Connector Pinout
Connector
OGI Pin and Card Port
1
1
Transmit 4
2
1
Transmit 8
describes the functions of the card-level LEDs on the OC48/STM16 SR/SH 16 Port 1310
OC48/STM16 SR/SH 16 Port 1310 Card-Level Indicators
Color
Description
Red
Indicates a hardware fault; this LED is off during normal operation.
Replace the card if the STAT LED persists. During diagnostics, the LED
flashes quickly during initialization and slowly during configuration
synchronization.
Green
The service mode of the card. Green indicates that the card is in use,
amber indicates that the card is out of service, and off indicates that the
card is either booting or has no power applied.
Green
The green LASER ON LED indicates that at least one of the card's
lasers is active.
describes the functions of the network-level LEDs on the OC48/STM16 SR/SH 16 Port 1310
OC48/STM16 SR/SH 16 Port 1310 Network-Level Indicators
Color
Description
Blue
The blue SD LED indicates a SD or condition such as a low signal level
on at least one of the card's ports.
Red
The red SF LED indicates a signal failure or condition such as LOS,
LOF, or high bit error rate (BER) on at least one of the card's ports. The
red SF LED also turns on when the transmit and receive fibers are
incorrectly connected. When the fibers are properly connected, the LED
turns off.
lists the OC48/STM16 SR/SH card OGI connector pinouts.
2
3
Receive 4
Transmit 3
2
3
Receive 8
Transmit 7
2.5.3 OC48/STM16 SR/SH 16 Port 1310 Card-Level Indicators
4
5
Receive 3
Transmit 2
4
5
Receive 7
Transmit 6
Cisco ONS 15600 Reference Manual, R6.0
6
7
Receive 2
Transmit 1
6
7
Receive 6
Transmit 5
8
Receive 1
8
Receive 5
2-13

Advertisement

Table of Contents
loading

Table of Contents