Figure 7-4 Editing Path Protection Selectors - Cisco ONS 15600 Reference Manual

Chapter 7 Circuits and Tunnels
In the UPSR Selectors tab, the SF Ber Level and SD Ber Level columns display "N/A" for those nodes
Note
that do not support VT signal bit error rate (BER) monitoring. In Software Release 6.0, only the
Cisco ONS 15310-CL supports VT signal BER monitoring.
From the UPSR Switch Counts subtab, you can:
• Perform maintenance switches on the circuit selector.
• View switch counts for the selectors.
Figure 7-4
On the UPSR Switch Counts tab, you can view switch counts for the selectors
Editing Path Protection Selectors
7.6 Path Protection Circuits
(Figure
Cisco ONS 15600 Reference Manual, R6.0
7-5).
7-13