Port And Cross-Connect Service State Transitions - Cisco ONS 15600 Reference Manual

Appendix B Administrative and Service States
Table B-4
Current Service State
OOS-MA,MT
B.3.2 Port and Cross-Connect Service State Transitions
Table B-5
cross-connect states with one exception. A cross-connect in the OOS-AU,AINS service state cannot
transition autonomously into the IS-NR service state until the parent port is IS-NR.
Note Deleting a port or cross-connect removes the entity from the system. The deleted entity does not
transition to another service state.
Table B-5
Current Service State
IS-NR
OOS-AU,AINS
ONS 15600 Card Service State Transitions (continued)
Action
Change the administrative state
to IS.
Delete the card.
Pull the card.
Reset the card.
Alarm/condition is raised.
lists the port and cross-connect service state transitions. Port states do not impact
ONS 15600 Port and Cross-Connect Service State Transitions
Action
Put the port or cross-connect in
the OOS,MT administrative
state.
Put the port or cross-connect in
the OOS,DSBLD administrative
state.
Put the port or cross-connect in
the IS,AINS administrative state.
Put the port or cross-connect in
the IS administrative state.
Put the port or cross-connect in
the OOS,MT administrative
state.
Put the port or cross-connect in
the OOS,DSBLD.
Alarm/condition is raised.
B.3.2 Port and Cross-Connect Service State Transitions
Next Service State
IS-NR
OOS-AUMA,UAS
OOS-AUMA,MT & UEQ
OOS-AUMA,MT & SWDL
OOS-AUMA,FLT & MT
Next Service State
OOS-MA,MT
OOS-MA,DSBLD
OOS-AU,AINS
IS-NR
OOS-MA,MT
OOS-MA,DSBLD
OOS-AU,AINS & FLT
Cisco ONS 15600 Reference Manual, R6.0
B-5