Asap Specifications; Table A-9 Asap Card Specifications - Cisco ONS 15600 Reference Manual

Appendix A Hardware Specifications
A.2.7 ASAP Specifications
Table A-9
Table A-9
Specification Type
Carrier Card (CC)
4PIO Pluggable I/O
card
Payloads
SFP support
Connectors
Power
Operating temperature
Operating humidity
Dimensions
Compliance
shows the ASAP card specifications.
ASAP Card Specifications
Description
Contains slots for four pluggable ASAP I/O cards, which can be used to
provide a variety of optical line interfaces. The CC provides 4 electrical
STS-48 or Gigabit Ethernet signals to each ASAP I/O card (for 16 total) and
16 redundant electrical STS-48 matrix interfaces to the backplane. For
SONET interfaces, the CC card provides pointer processing and overhead
extraction/insertion.
The ASAP 4PIO module is a four-port multirate optical interface card. It has
four slots for Small Form-factor Pluggable (SFP) optics. The four ports can
be provisioned on a per-port basis as OC-3, OC-12, OC-48, or
Gigabit Ethernet interfaces.
Nonconcatenated and/or concatenated payloads at STS-1, STS-3c, STS-6C,
STS-9C, STS-12c, STS-24C, and STS-48C are supported. For Gigabit
Ethernet interfaces, Layer 1 Ethernet transport is also implemented.
ONS-SE-Z1: Supports OC-3 SR-1, OC-12 SR-1, OC-48 IR-1 or GE LX
ONS-SI-155-L2: Supports OC-3 LR-2
ONS-SI-622-L2: Supports OC-12 LR-2
ONS-SE-2G-L2: Supports OC-48 LR-2
Up to 16 SFP connectors (4 per 4PIO module) at front edge of card
150 W to 200 W (maximum)
23 to 131 degrees Fahrenheit (–5 to +55 degrees Celsius)
5 to 95%, noncondensing
Height: 16.50 in. (419 mm)
Width: 1.50 in. (38 mm)
Depth: 18.31 in. (465 mm)
Card weight: approximately 6 lb (13.22 kg)
SONET Telcordia GR-253
When installed in a system, ONS 15600 cards comply with these safety
standards: UL 60950, CSA C22.2 No. 950, EN 60950, IEC 60950
Eye safety compliance: Class 1 (21 CFR 1040.10 and 1040.11) and Class 1
(IEC 60825) laser products
A.2.7 ASAP Specifications
Cisco ONS 15600 Reference Manual, R6.0
A-11