Node Default Settings; Table C-4 Node Default Settings - Cisco ONS 15600 Reference Manual

C.3 Node Default Settings
Table C-3 ASAP Card Default Settings (continued)
Default Name
ASAP_4.pmthresholds.oc48.sts3c-9c.nearend.1day.SES
ASAP_4.pmthresholds.oc48.sts3c-9c.nearend.1day.UAS
C.3 Node Default Settings
Table C-4
user-configurable defaults for each Cisco ONS 15600 node:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Cisco ONS 15600 Reference Manual, R6.0
C-24
lists the node-level default settings for the Cisco ONS 15600. Cisco provides the following
Create Like TL1—Instructs the node to create only cross-connects, allowing the resulting circuits
to be in an upgradable state.
Path Protection settings—Set the threshold level for signal degradation and failure for path
protection circuits.
Defaults Description—Names the current defaults file on the node.
Enable Firewall enables or disables the use of a firewall for accessing the node.
Enable Proxy—Enables or disables the use of a proxy server with the node.
IIOP Listener Port—Sets the Internet Inter-Object Request Broker Protocol (IIOP) listener port
number.
Login Warning Message—Warns users at the login screen about the possible legal or contractual
ramifications of accessing equipment, systems, or networks without authorization.
NTP SNTP Server—Sets the IP address of the Network Time Protocol (NTP) Simple Network Time
Protocol (SNTP) server to be used with the node.
Time Zone—Sets the time zone where the node is located.
Use DST—Enables or disables the use of Daylight Savings Time.
Use NTP SNTP Server—Enables or disables the use of the specified NTP SNTP server with the
node.
1+1 Protection settings—Determine whether or not 1+1 protected circuits have bidirectional
switching, are revertive, and what the reversion time is.
BLSR Protection Settings—Determine whether BLSR protected circuits are revertive and what the
reversion time is at both the ring and span levels.
Security Policy settings—Determine the allowable failed logins before lockout, idle user timeout
for each user level, optional lockout duration or manual unlock enabled, password reuse and change
frequency policies, number of characters difference between the old and new password, password
aging by security level, enforced single concurrent session per user, and option to disable inactive
user after a set inactivity period.
BITS Timing settings—Determine the AIS threshold, coding, framing, State, State Out, and LBO
settings for BITS1 and BITS2 timing.
General Timing settings—Determine the mode (External, Line, or Mixed), quality of RES,
revertive, reversion time, and SSM message set for node timing.
Appendix C
Default Value Default Domain
7 (seconds) 0–86400
10 (seconds) 0–86400
Network Element Defaults