4Pio Module Faceplate; Asap Card-Level Indicators; Asap Card Port-Level Indicators - Cisco ONS 15600 Reference Manual

2.8.4 4PIO Module Faceplate

2.8.4 4PIO Module Faceplate
Figure 2-8
Figure 2-8

2.8.5 ASAP Card-Level Indicators

Table 2-20
Table 2-20
Indicator
STAT LED
SRV LED
LASER ON

2.8.6 ASAP Card Port-Level Indicators

Table 2-21
depending on whether the port is configured for SONET or Ethernet.
Cisco ONS 15600 Reference Manual, R6.0
2-22
shows the 4PIO module faceplate.
4PIO Module Faceplate
1
ASAP
4P IO
2
3
4
describes the functions of the card-level LEDs on the ASAP carrier module.
ASAP Card-Level Indicators
Color Description
Red Indicates a hardware fault; this LED is off during normal operation.
Replace the unit if the STAT LED persists. During diagnostics, the
LED flashes quickly during initialization and slowly during
configuration synchronization.
Green/Amber The service mode of the card. Green indicates that the card is in use,
amber indicates that the card is out of service, and off indicates that
the card is either booting or has no power applied.
Green The green LASER ON LED indicates that at least one of the card's
lasers is active.
describes the functions of the port-level LEDs (numbered 1 through 4) on the 4PIO modules,
Chapter 2 Card Reference